Depending on the variant selected, the DS110 supports monitors from 17 to 32 inches, 17 to 35 inches, or 22 to 40 inches. Laptop variants support 10 to 18 inch screens. To confirm your screen size, measure diagonally across the panel (not including the bezel) or check the manufacturer’s spec sheet. Select the correct Size & Load Capacity option before adding to cart.

Weight capacity varies by variant: 3–10 kg (6.6–22 lbs) for the Luxury Full Aluminum Model, 9 kg (19.8 lbs) for Classic and Dual Screen Laptop & Monitor models, 10 kg (22 lbs) for Flagship models, and up to 15 kg (33 lbs) for the Heavy Load Full Spec Model. Always check your monitor’s weight without stand in its spec sheet before selecting a variant. Exceeding the rated capacity may cause the arm to sag or fail to hold position.

The DS110 supports VESA 75×75mm and 100×100mm mounting patterns. To check your monitor’s VESA pattern, look at the four screw holes on the back of the panel and measure the horizontal and vertical distance between them. If the holes are recessed in a cavity, use the included black spacer pads and longer screws to bridge the gap — this works for recesses up to approximately 10mm deep. For deeper recesses, contact us before ordering.

Yes, with an optional accessory. For monitors without VESA holes, you can use the H1 bracket accessory — a U-shaped cradle that grips the monitor frame from behind — or adhesive VESA adapter pads that attach to the back of the panel. Contact us with your monitor’s model number to confirm which accessory is compatible before purchasing.

The clamp mount grips the edge of your desk without drilling. It fits desks 15–95mm (0.6–3.7") thick with a minimum underside clearance of 57mm (2.2"). The grommet mount passes through an existing hole (minimum 10mm diameter) in your desk for a cleaner, more permanent installation, rated for desks 15–92mm (0.6–3.6") thick. The clamp mount is not suitable for glass, stone, or soft wood desktops; desks with a cross-beam underneath; or desks with a beveled or angled edge profile.

The arm ships with spring tension set to a mid-range default. If your monitor is heavier and slides down after release, raise the arm to a horizontal position, then turn the tension adjustment screw in the ‘+’ direction to increase holding force. If the monitor is lighter and the arm springs upward, turn the screw in the ‘−’ direction. Always support the monitor with your hand while adjusting, and do not force the screw beyond the maximum or minimum stop.

Yes. The DS110 is explicitly rated for flat screens, curved monitors, and ultrawide (superwide) panels, provided the monitor falls within the supported size and weight range for the selected variant. For monitors between 22 and 40 inches or up to 15 kg (33 lbs), select the Heavy Load Full Spec Model. For standard curved ultrawides up to 35 inches and 10 kg, the Flagship models are appropriate.

Yes — select the Upside-Down Classic Model, Upside-Down Flagship Model, or Upside-Down Laptop Model variants, which are specifically engineered for inverted ceiling, shelf, or overhead rail mounting. These are ideal for space-saving overhead monitor arm setups, under-cabinet display installations, or gaming stations where the monitor needs to hang from above rather than rise from the desk.