General Description

The FCNID-1EP-1ES PoE/PoE+ Fast Ethernet media converter is an industrial-grade Fast Ethernet converter. It comes with a 1 x 10/100Base-TX slot for the Ethernet interface and a 1 x 100Base-FX for the fiber interface. For fiber interface, it can support the 155Mbps SFP transceiver and the transmission of the fiber signal will depend on the type of SFP selected. The Ethernet interface, on the other hand, can supply up to 30 watts of power, allowing IP devices to be powered up remotely without an additional power supply source. As the FCNID-1EP-1ES PoE/PoE+ Fast Ethernet media converter can support a broad temperature range from -40 degrees Celsius to 85 degrees Celsius, it is suitable to be installed in rugged harsh industrial environments.

Application Diagram

Features

· Auto MDI/MDI-X function 
· Auto-negotiation for Half/Full-duplex mode and speed
· Support link-fault-pass-through function to monitor broken links 
· Support store-and-forward /cut-through working mode 
· Support jumbo frame rate of 9kbytes 
· Come with a resettable fuse to prevent current overload
· Come with IP-40 rating protection 
· Provide protection against power polarity reverse 
· Provide protection against electrical fast transient 
· Provide protection against electrostatic discharge (ESD) 

Standard Compliances 

EMC: CE 
EMI: FCC Part 15 CLASS A 
EMS: IEC 61000-4-2 Level 4 (8K/15K)
         IEC 61000-4-3 Level 3 (10V/m)
         IEC 61000-4-4 Level 3 (1V/2V)
         IEC 61000-4-5 Level 3 (4KV/2KV)
         IEC 61000-4-6 Level 3 (10V/m)
         IEC 61000-4-8 Level 4 (30A/m)
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32 0.5m
Vibration: IEC 60068-2-6
Railway Traffic: EN50121-4

Specifications

Standards Comply

• Standards 
  

  IEEE802.3 10BaseT 
  IEEE802.3u 100BaseT(X) 
  IEEE802.3x Flow control
  IEEE802.1d Spanning Tree 
  IEEE 802.3af/at POE  
  
  

Interface

• Copper Port
  Data Rate: 10/100M
  Connector: RJ45
  
  
• F/O Port
  Data Rate: 155M
  Connector: SFP slot 

Performance 

• Processing Type: Store and Forward, Cut-through
  
• Back Bandwidth: 0.4Gbps
• MAC Address Size: 2Kbit
• Packet Buffer Size: 1Mbit
• Time Delay: <10us
• Frame: 9Kbytes

LED Indicators 

• Indicators 
  PWR1: ON=Power Connected
  PWR2: ON= Power Connected
  FL/A: ON=Fiber Connected; Active=Data Transmitting
  TL/A:ON=Copper Connected; Active= Data Transmitting
  100M: ON=100M Data Rate Transmitting
  PoE: ON=Power Working; Off=No Power

Dip-switch

• Dip1 ON + Dip2 ON = Modified Cut-through Mode
• Dip1 ON + Dip2 Off = Converter Mode
• Dip1 Off + Dip2 ON = Cut-through
• Dip1 Off + Dip2 off = Store and forward mode
• Dip4 ON = LFP Enable
• Dip4 Off = LFP Disable

Operating and Environmental 

• Operating Temperature 
  -40°C ~ 85°C
  
• Storage Temperature
  -40°C ~ 95°C
  
• Humidity
  5% ~ 95%, non-condensing  
  

Dimension and Weight 

• Dimension (mm)
  115*81*35mm ( HXDxW)

• Weight 
  0.3kg (weight for the device without packaging)
  
  

Housing

• Material
  Aluminium Alloy IP40 Rated
  

 
Power Requirement

• Input Voltage: 12~56 VDC, 48V~58V for PoE functionality
  
• Power Consumption: ≤5W
• Protection: Overload Current; Reverse Polarity 
• Connector: Terminal Block 
  
• PoE Budget: 15.4W(PoE), 30W(PoE+) 
  
  

Installation

• can be DIN-Rail mounted