About the product

MINI modules have been designed to complement the MIX series. Depending on the project needs, one of 7 different MINI can be chosen, all inputs and outputs are unified among our products. One feature that makes these two product groups different is hand operating switches, in some applications, it is required. Moreover, all I/O modules haveBTL, CEandULcertificates.

Like in the case of the MIX modules IP (1x Ethernet), MINI are factory-equipped with the most popular open communication protocols Modbus (TCP/IP) and BACnet (IP), which are selected using DIP switches. Rotary switches are used to set the module address, which facilitates and accelerates the process of commissioning the system. Built-in mini USB allows for the initial configuration of the unit without external power supply.

MINI I/O Modules with Ethernet have built-in Modbus Gateway TCP/IP to Modbus ASCII/RTU, enabling you to connect additional modules/devices that communicate via Modbus RS485.

iSMA-B-4U4O-H-IP is one of the most innovative and easy to setup IO module on the market. Works on either Bacnet or Modbus. It has 4 Universal Inputs and 4 Digital Outputs and can be hand operated.

BMS Compatibility

System	Controller
	Tridium Jace3, Jace6, Jace8000Compatible
	Trend IQ3, IQ4 Bacnet IP
	Siemens PX range
	Cylon Bacnet controllers
	Schneider Electric StruxureWare Bacnet controllers
	OSS NeOSS building management controller
	Priva Blue ID
	Distech EC Bos Compatible
	DELL EDGE GATEWAY 5000 IO MODULES
	Honeywell Centraline IO MODULES Compatible with any Hawk
	Delta Controls Compatible IO Modules
	Greenologic GreenBox Compatible IO Modules
If your BMS is not listed please email:	[email protected]

4x Universal inputs (4UI)

• Temperature input support the following types of sensors: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1, Pt1000, Ni1000 For sensor Pt1000 and Ni1000 use only 16bit resolution
• Voltage input 0-10VDC: input resistance 100k accuracy 0,1% measurement resolution 3mV@12bit and 1mV@16bit
• Current input 0-20mA -Required external resistor: 200 , sold separately
• Resistive input 0-1000k: measurement resolution for 20k load 20@12bit and 1@16bit
• Dry contact input

4x Digital Outputs (4DO)

• Relay output (NO) max. 3A, 250V AC/30 VDC

Platform

• Cortex-M3

Communication

• Interface RS485 half duplex
• 1 x Fast Ethernet
• Up to 99 devices on the bus
• Protocols: MODBUS or BACnet
• Baud rate: 2400 to 115200 bps

Power supply

• 24V AC/DC

Housing

• Dimension: 35x110x62 mm.
• Construction: plastic, self-extinguishing (PC/ABS)
• DIN rail mounting (DIN EN 50022 norm)
• Cooling: internal air circulation

Environments

• Operating temperature: -10C to 50C
• Storage temperature: -40C to 85C
• Relative humidity: 5 to 95%, no condensation
• Ingress Protection Rating: IP40 for indoor installation

In the DOWNLOAD session you can find:

• The ISMA driver for Niagara, which contains the ISMA device Palette
• Isma configurator which is needed for updating firmware and configure modules
• Templates for Siemens sensors for Niagara (Generic Tabular) - Ni1000 Ohm at 0C - PTC T1 (Resistance/Voltage) - Pt100 Ohm at 0C - Pt1000 Ohm at 0C - Pt1000 Ohm at 0C - Pt1000 Ohm at 0C - Pt1000 Ohm at 0C - Pt1000 Ohm at 0C - Ni100 Ohm at 0C - Ni100 Ohm at 20C - NTC 107 Ohm at 20C - NTC 150 Ohm at 31C - NTC 1 kOhm at 20C - NTC 1 kOhm at 20C - NTC 2 kOhm at 20C - NTC 3850 Ohm at 0C - NTC 500 Ohm at 20C - NTC 575 Ohm at 20C - NTC 8250 Ohm at 19C