Summary

A compact rainproof chiller built to cool your plunge setup. You get steady temperatures in the low- to mid-40s with simple installation for home use.

Overview

The unit delivers 7,500 BTU/hr of cooling with a ¾ HP compressor and a built-in circulation pump. It runs on a standard 110–120 V circuit and holds noise near 65 dBA. The housing resists rain but not freezing conditions. Size stays compact at 17 × 15 × 13 in with a weight of 49 lb. Each unit is built in Tennessee and covered by a 1-year limited warranty.

Set Components

• ¾ HP chiller with pump
  
• Inline screen filter
  
• Quick-connect fittings
  
• User manual and warranty

Compatibility

Works with most plunge tubs and containers. Tub sold separately. Confirm tubing size and flow direction before setup.

Installation

• Place the unit below the tub waterline
  
• Install tubing and fittings between tub and chiller
  
• Fill the tub and confirm flow
  
• Plug into a GFCI-protected outlet
  
• Set your target temperature
  
• Check water temperature with a thermometer

Operation and Maintenance

• Rinse the inline screen filter on schedule
  
• Inspect tubing for kinks or leaks
  
• Keep vents open for airflow
  
• Store indoors before freezing conditions
  
• Use a dedicated GFCI circuit for safety

Capacity Notes

Cooling performance depends on water volume, room temperature, and insulation.

Specifications

• Cooling Capacity: 7,500 BTU/hr
  
• Compressor: ¾ HP
  
• Voltage: 110–120 V / 3.9 A
  
• Size: 17 × 15 × 13 in
  
• Weight: 49 lb
  
• Noise: 65 dBA
  
• Temp Range: low- to mid-40 °F
  
• Pump: built-in circulation pump (not self-priming)
  
• Weather Rating: rainproof only
  
• Warranty: 1-year limited warranty
  
• Made in Tennessee

Features & Benefits

Features

• Deliver 7,500 BTU/hr cooling with a ¾ HP compressor
  
• Hold water in the low- to mid-40s
  
• Move water with a built-in pump
  
• Filter debris with an inline screen
  
• Use quick-connect fittings for faster setup
  
• Run on a standard 110–120 V circuit
  
• Handle rain exposure with a weather-resistant shell

Benefits

• Support recovery with cold immersion
  
• Set up a home plunge with a compact footprint
  
• Keep flow steady with internal pumping
  
• Protect the system with simple filtration
  
• Install with basic tubing and quick fittings

Disclaimer

This unit delivers cold immersion temperatures that pose risks including cold shock, hypothermia, cardiac arrest, and drowning. Consult a clinician before use. Never use alone. Always verify water temperature with a thermometer. Follow all manual instructions and use a GFCI-protected outlet.