← TEKTELIC at INNON® / TUNDRA + Probe

A Ready For Anything® building block

TUNDRA base unit with 1.5m temperature probe included — ready to deploy on pipe surfaces, in ducts, or in immersion pockets without a separate probe order.

-40°C to +70°C · IP67 · 15-year battery · 1.5m probe included · LoRaWAN EU868

When to specify this variant

Order the TUNDRA + Probe bundle when the measurement point is a pipe surface, duct, immersion pocket, or any location where the sensor body cannot sit at the measurement point. The 1.5m probe bridges the gap — sensor body mounts on the wall, probe clips to the pipe or sits in the pocket.

All TUNDRA specifications apply. Probe is pre-connected and tested at dispatch — no site wiring required beyond positioning.

Why the TUNDRA with Probe is Ready For Anything®

🟢 Ready for Today

• NTC probe — pipe surface and ambient readings, ±0.5°C — measure flow and return pipe temperatures in a plant room without a wired PT100 or thermistor input
• Dual temperature reporting in one uplink — internal ambient and probe temperature reported together; two BACnet analog input objects from one device address, one LoRaWAN slot
• Battery powered, no wiring required — clip the probe to the pipe, mount the sensor, commission via the KONA gateway; no cable run, no wiring centre change, no electrician
• Up to 10 years battery life — deploy once, leave it running; no annual battery replacement in a live plant room

🔵 Ready for Change

• Probe is a separate accessory — start with ambient monitoring on the base unit, add the probe when the application requires it without replacing the sensor body
• Deploy exactly where measurement is needed — no cable constraint means the measurement point goes where the engineering requires, not where the nearest wiring centre happens to be

🔐 Ready for Security

• AES-128 LoRaWAN encryption — sensor data encrypted end to end from device to KONA gateway
• Battery operation removes mains dependency — sensor continues to report through a mains outage as long as the KONA gateway has battery backup active

🔗 Ready for Integrations

• LoRaWAN Class A — EU868, US915, AU915 — pairs with TEKTELIC KONA Micro or Enterprise gateways
• BACnet output via KONA embedded LNS — probe temperature maps to a BACnet analog input object in Niagara; use it in a heating control sequence like any wired sensor
• Practical applications — flow and return on heating circuits, cold store pipe, duct surface temperature where cable routing is not viable

For commissioning support or probe compatibility queries contact [email protected].