Description

SimBooth Kit 2 - 4K

The SimBooth Kit 2 - 4K is the upgraded, turnkey golf simulator bundle built around the larger SimBooth 2 enclosure, with a true 4K laser projector for next-level image quality.

It is ideal for clubs, teaching bays, and higher-end home installs that want a wider, taller hitting bay and a crisp, ultra-detailed picture without having to source components from multiple vendors.

You get a heavy-duty aluminum enclosure, full-surface raised floor, half walls, a crease-free impact screen, and a 32” × 54” × 2” commercial hitting mat, plus the full tech stack: the IDRA II overhead launch monitor, 4K Laser BenQ AK700ST short-throw projector, and a 1-year GSPro membership.

The enclosure is approximately 12’1” wide × 12’ deep × 8’9” high, with recommended room space around 14’ W × 16’ D × 9’7” H or larger for comfortable swings, overhead mounting, and projector throw.

Everything arrives as a coordinated package so a capable team of 3–4 people can install it in a few hours and be ready to tee off in stunning 4K the same day.

Product Features

Product Features

What's Included

What's Included

• SimBooth Kit 2 enclosure
  • Includes aluminum frame, solid black panels, left and right half walls, and ceiling panels.

• Full-surface floor system
  • Includes modular floor panels and integrated hitting mat cut-out.

• Commercial hitting mat
  • Approximately 32" x 54" x 2".

• Impact screen
  • Crease-free, low bounce-back impact screen with 16:10 ratio.

• IDRA II AI overhead launch monitor
  • Includes integrated light and required cabling.

• 4K Laser BenQ AK700ST short-throw projector

• Projector beam / mount
  • Designed for structure-mounted projector installation.

• GSPro golf simulator software – 1-Year Membership
  • Auto-renews after year 1 unless cancelled.

• Required cabling
  • Includes HDMI, USB, and power cables.
• Basic hardware and tools for assembly
  • Includes bolts, nuts, washers, wing nuts, and Allen keys.
• Basic installation instructions and documentation

Product Specifications

Product Specifications

Enclosure & Room Specs

Tech & Software

Getting Started Guide

Getting Started Guide

1. Verify your room size
   • Measure width, depth, and ceiling height to confirm your space meets or exceeds the recommended 14’ W × 16’ D × 9’7” H.
   • Confirm there are no low beams, lights, fans, or other obstructions in the swing path.
2. Plan layout and PC location
   • Decide where the SimBooth 2 will sit and where your PC will be located.
   • Note nearby power outlets and network availability.
3. Unpack the crate
   • Open the crate carefully and group parts by type.
   • Separate enclosure frame pieces, wall / ceiling panels, floor panels, hitting mat, impact screen, IDRA II, projector, projector beam / rafter, hardware, and cabling.
4. Pre-stage in the final room
   • Move all components into the final room before assembly.
   • Lay out panels and key parts roughly where they will end up to visualize the bay footprint.
5. Review installation documentation
   • Read through the SimBooth Kit 2 - 4K installation guide and IDRA II install guide before starting.
   • This helps you understand the assembly sequence and mounting references.
6. Assemble the frame on the floor
   • Build the ceiling section and upper frame while it is lying flat on the floor.
   • Follow the diagrams for orientation and fastener locations.
7. Install lower panels and bracing
   • Add lower wall panels and any structural braces specified in the guide to stiffen the enclosure before raising it upright.
8. Raise the enclosure into position
   • With 3–4 helpers, tilt and lift the assembled frame into its final position.
   • Check clearance to the walls and ceiling, then make minor adjustments as needed.
9. Install the screen and floor
   • Mount the impact screen while tensioning the top, sides, and bottom evenly.
   • Lay the full-surface floor panels and place the hitting mat into its designated area so it lines up with the hitting zone.
10. Mount IDRA II and projector
    • Install the IDRA II overhead launch monitor at the recommended distance and height from the hitting area.
    • Mount the BenQ AK700ST on the beam or rafter at an appropriate throw distance.
11. Connect PC, power, and data
    • Run HDMI from the PC to the projector and USB / network from the PC to IDRA II.
    • Secure cables so they are away from feet and swing paths.
12. Install GSPro and configure
    • Install GSPro on your PC, activate your membership, and connect IDRA II.
    • Confirm shots are detected and displayed correctly in the simulator.
13. Fine-tune and test in 4K
    • Adjust projector zoom, focus, and keystone so the 4K image fills the screen sharply.
    • Hit test shots and fine-tune launch monitor alignment and settings until ball flight and distances look realistic.

Product Installation Guide

Product Installation Guide

1. Gather tools and helpers
   • Plan for 3–4 adults for safe lifting and alignment.
   • Have a tape measure, level, socket / wrench set, screwdrivers, ladders / step stools, and any tools suggested in the installation guide.
2. Assemble the ceiling frame
   • On the floor, connect ceiling frame pieces using the supplied hardware.
   • Confirm the frame is square by measuring diagonals before tightening fully.
3. Attach upper wall panels
   • Bolt upper panels to the ceiling frame according to the layout diagram.
   • Check that edges align and correct any misalignment before fully tightening fasteners.
4. Install lower wall panels and braces
   • Attach lower wall panels to complete the sidewalls and back wall.
   • Add any bracing or cross-members that stiffen the overall structure.
5. Add half walls
   • Mount the left and right half walls at the specified locations on the frame.
   • Ensure they are plumb and aligned with the main enclosure.
6. Raise the assembled structure
   • With helpers, lift the enclosure from horizontal to vertical and slide it into its final room position.
   • Check for adequate clearance to the ceiling and side walls.
7. Level and square the frame
   • Use a level to confirm posts are vertical and the base is stable.
   • Adjust slightly if needed so the frame is not twisted, which helps the screen hang flat and the floor sit properly.
8. Install the full-surface floor
   • Lay floor panels in the sequence described in the guide so they interlock correctly.
   • Confirm there is no rocking and that seams are tight.
9. Install the hitting mat
   • Place the hitting mat in its cut-out or designated area.
   • Make sure it is flush with the surrounding floor and aligned with the future hitting zone of IDRA II.
10. Mount the impact screen
    • Attach the screen at the top center first, then work toward the corners and down the sides.
    • Apply tension gradually to remove wrinkles while keeping some give for ball impact.
11. Mount IDRA II overhead
    • Locate the pre-drilled mounting points outlined in the technical plan.
    • Mount the IDRA II bracket, attach the unit, and route cables neatly along the frame.
12. Install projector beam and AK700ST
    • Attach the projector beam / rafter to the enclosure as specified.
    • Mount the BenQ AK700ST to the beam, roughly center it, and set an initial throw distance based on the screen size.
13. Cable management
    • Run power and HDMI to the projector.
    • Run USB / network cables for IDRA II back to the PC.
    • Secure everything with clips or ties to keep cables out of walkways and swing paths.
14. PC and software setup
    • Set your PC to output at the desired resolution, including 4K if supported.
    • Install IDRA II software and GSPro, then follow the setup prompts to connect and calibrate.
15. Calibration and final checks
    • Calibrate screen boundaries, hitting zone, and launch monitor alignment.
    • Hit a series of test shots with multiple clubs.
    • Walk around the bay to ensure no loose fasteners, protruding edges, or tripping hazards remain.

Brochures

Brochures

Videos

Videos

Product Manual and User Guides

Product Manual and User Guides

Technical Drawings

Technical Drawings

YouTube Reviews

YouTube Reviews

FAQ's

Frequently Asked Questions