EXTREME ECO-COMPATIBLE WATER- AND OIL-REPELLENT PROTECTION

• WHAT'S IT FOR

  • Water- and oil-repellent with natural finish.
  • The best environmentally-friendly stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt smoothed finishes.
  • Reduces absorption without affecting the material’s natural look.
  • It waterproofs, protects and facilitates cleaning.
  • It is also ideal for grouting joints, ceramic and crackle effect surfaces, grit, resin-marble, and stone slabs.
  • Is also suitable for treating coloured cement tiles and manufactured stones.
  • It provides an anti-graffiti protection that prevents graffiti paint from bonding to surfaces. It speeds the cleaning process because graffiti can be easily removed.
  • Water- and oil-repellent: it hampers the absorption of common watery and oily stains.

   
  

  ADVANTAGES

  • CONTRIBUTES TOWARDS LEED CREDITS
  • FREE OF HYDROCARBON SOLVENTS: ECO-FRIENDLY TREATMENT
  • BEING A WATER-BASED PRODUCT, IT WITHSTANDS RESIDUAL HUMIDITY CONDITIONS AND CAN THEREFORE BE APPLIED 24–48 HOURS AFTER THE INITIAL WASH, THUS SPEEDING UP THE TREATMENT
  • SINGLE-COAT APPLICATION: APPLY THE PRODUCT AND RUB IT GENTLY OVER THE SURFACE UNTIL IT IS COMPLETELY ABSORBED
  • DOES NOT FORM SURFACE FILM AND DOES NOT YELLOW
  • IDEAL FOR PROTECTING TABLES, AS WELL AS KITCHEN AND BATHROOM TOPS
  • THE SURFACE CAN BE WALKED ON AFTER JUST 2 HOURS*
  • THE TREATED SURFACES ARE SUITABLE FOR FOOD CONTACT.
  • APPLY ACCORDING TO THE INDICATIONS SHOWN ON THE LABEL.

   

  IDEAL FOR

  • POLISHED PORCELAIN TILES
  • MARBLE AND GRANITE
  • NATURAL STONE AND AGGLOMERATES
  • CONCRETE

   
  

  METHOD OF USE

  No dilution required: ready to use.

  Application: Shake before use.
  For materials with matt finish (natural stone, terracotta, agglomerates, cement tiles): Apply MP90 ECO XTREME evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well.Dab any excess product with a clean cloth before it dries. On highly absorbent materials, apply two coats of product with a 20-minute interval in between.For polished porcelain tiles, natural stone, agglomerates with glossy finish:Apply MP90 ECO XTREME on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad.Before the product dries (roughly 10-15 minutes), rub it using a microfibre cloth wetted with the product to favour its penetration. Dry the surface with a clean cloth. To speed up the process, it is possible to treat the surface with a single-disc machine.To complete the cycle with the finish:On porous materials such as natural stone, reconstructed tiles, agglomerates and cement tiles laid in indoor environments, a finishing wax can be applied depending on the material and on the desired effect (MATT, SATIN, CLASSIC, LONGLIFE).The surface can be walked on after just 2 hours.Water- and oil-repellent protection takes effect after 24 hours.Maintenance:use a diluted solution of CLEANER PRO.

  COVERAGE

  With one litre of product:

  • polished porcelain tiles30-50 m²
  • Polished Marble/Granite 20-30 m²
  • Matte polished stone10/20 m²
  • “Coverage shown is for guidance purposes only and refers to single coats”

   

  PLEASE NOTE

  Before applying to the entire surface, test the product on a small area to check for colour changes. Do not apply the product externally if rain is forecast. Does not protect against acidic aggression.