NOTICE: Product images may vary from the actual item due to differences in size or configuration options.

The Wilkins 2-975XLFT is a 2-inch Reduced Pressure Principle Backflow Prevention Assembly designed for non-potable water applications with integral 45° flare SAE test fittings.

Key Specifications:

• Size: 2 Inches
• Maximum Working Pressure: 175 psi
• Maximum Working Temperature: 180°F
• Notable Certifications: ASSE 1013, cUPC, CSA B64.4
• Test Fitting Type: Integral 45° Flare SAE

Other Related Variants:

• 112-975XLFT: 1 1/2 Inches model size
• 1-975XLFT: 1 Inch model size
• 34-975XLFT: 3/4 Inches model size

Materials:

• Body: Cast Bronze ASTM B584
• Fasteners: 300 Series Stainless Steel
• Elastomers: Silicone/Buna Nitrile
• Springs: 300 Series Stainless Steel

Typical Installation:

The Zurn 2-975XLFT must be installed 12 to 30 inches above adequate drains with sufficient side clearance for testing and maintenance. The unit must not be submerged. For indoor installations, an air gap adapter is required to prevent water spillage damage.

Standards Compliance:

ASSE 1013; cUPC; UL/C-UL Classified; CSA B64.4; AWWA C511; NYC MEA 425-89-M VOL 3

Features & Benefits:

• Integrated Test Fittings: Built-in 45° flare SAE test fittings eliminate the need for additional accessories and simplify testing procedures.
• Full Port Ball Valves: Provides maximum flow capacity and minimal pressure loss for optimal system performance.
• Durable Bronze Construction: Cast bronze body with stainless steel components ensures long-lasting reliability in demanding applications.
• High Pressure Rating: Rated for up to 175 psi maximum working pressure, suitable for commercial and industrial applications.

FAQ

Q: What is the required clearance for installation of the Zurn 2-975XLFT?

A: The assembly must be installed 12 to 30 inches above adequate drains with sufficient side clearance for testing and maintenance access.

Q: Can the Wilkins 2-975XLFT be used for potable water applications?

A: No, this assembly is designed for non-potable applications only.

Q: What type of test fittings are included with this backflow preventer?

A: The unit features integral male 45° flare SAE test fittings built into the assembly.

"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us