Shopping security
The VTrack Premium 4K SimKit pairs the ceiling-mounted VTrack Overhead Launch Monitor with BenQ’s AK700ST 4K laser projector, your choice of enclosure, and the Beaver Tail hitting mat — everything pre-specified so room planning, compatibility, and setup are handled before the first box arrives.
The BenQ AK700ST distinguishes this configuration with a dedicated Golf Color Mode — factory-tuned picture settings that lift greens, fairway blues, and skin tones specifically for golf simulation — combined with a laser light source rated for approximately 20,000 hours and motorized 1.2× zoom for precise image sizing without physically repositioning the projector. At 0.69–0.83:1 throw ratio, it fits into the same short-throw ceiling bracket as the Optoma alternative while delivering the color accuracy that golf simulation specifically benefits from.
Continental US — no shipping charges
Compatibility verified across every component
Mounts, cables, and landing mats sized for this kit
Setup and post-purchase support from the team that built it
The VTrack mounts to the ceiling above the hitting position and tracks the ball and club head using photometric cameras — no floor sensors, no marker stickers, and no recalibration between left- and right-handed players. It captures full ball flight data, club head data, and a short impact video clip on every swing, then streams directly to GSPro and E6 Connect over the local network.
Installs overhead on a standard ceiling joist or unistrut rail. Keeps the floor and hitting zone completely clear. No cables crossing the mat, no tripping hazard.
High-speed cameras detect ball and club head motion without adhesive stickers or floor-mounted sensors. Setup is the same for every club in the bag.
Delivers ball speed, launch angle, spin axis, spin rate, club head speed, smash factor, and a short video clip of impact for every shot.
Native integrations with GSPro and E6 Connect. Also compatible with TGC 2019 and Awesome Golf via bridge software.
Handedness switching requires no hardware adjustment. Both orientations are supported without repositioning the unit or the mat.
A minimum of 9 ft of ceiling clearance is recommended for a full driver swing. Confirm your room dimensions before ordering.
Overhead advantage: Unlike side or rear-facing launch monitors, the VTrack’s ceiling position means it never interferes with follow-through on full shots or with putting strokes. The impact video captures the actual clubface-to-ball contact frame every time.
The BenQ AK700ST is purpose-built for high-ambient-light simulation environments. At 4,000 ANSI lumens with a 4K UHD (3840×2160) laser light source, it renders simulation visuals with the color accuracy golf specifically benefits from — a factory-calibrated Golf Color Mode lifts green tones, fairway blues, and skin tones that generic cinema modes tend to flatten.
Factory-tuned picture mode calibrated for golf simulation. Accurately renders fairway greens, deep sky blues, and natural skin tones that generic projector modes underperform on. Exclusive to the BenQ configuration in this SimKit lineup.
3840×2160 native resolution from a laser light source rated at approximately 20,000 hours of life — no bulb replacements for the usable life of the projector. At 4,000 lumens the image holds well in partially lit bays.
The 1.2× motorized zoom lets you fine-tune image size from the mount position without touching the projector. Auto Screen Fit detects the screen boundary and fills it with one button — no manual keystoning required at first setup.
±30° vertical, horizontal, and rotational keystone correction covers off-axis ceiling positions. Corner Fit handles trapezoidal distortion from angled mounts. Quick Focus shortens the post-mount alignment workflow.
Projects a full-size simulation image from a short ceiling-mount distance. Exact throw distance depends on enclosure width and mounting position — use the Projector Fitment Tool to confirm for your room.
HDR10 and HLG support, IP5X dust-resistant optical engine, two full-bandwidth HDMI 2.0 inputs, and USB-C DisplayPort Alt Mode for flexible PC and console connectivity.
Projector fitment note: Throw distance and ceiling mount height depend on your enclosure width and room depth. Never calculate throw distances manually — use the Projector Fitment Tool to confirm the BenQ AK700ST works in your specific room before ordering.
The SimKit is available with three enclosure sizes to match different room footprints. Width determines projector throw distance and screen-to-tee depth — select the size that fits your ceiling height, floor footprint, and preferred image size. Confirm projector placement with the Projector Fitment Tool after choosing your enclosure.
Room planning: Enclosure width directly affects projector throw distance. Confirm ceiling clearance and mounting position using the Projector Fitment Tool before finalizing your enclosure selection.
The Beaver Tail double-wide mat replaces the single-width hitting strips typically bundled with simulator packages. The wider stance platform accommodates a natural setup for both feet without crowding, and the center hitting strip is a discrete replaceable insert — when the hitting zone wears down, replace only the strip rather than the entire mat surface.
Wide enough for a full stance with room for both feet, alignment aids, and natural footwork through the swing without stepping off the mat.
The center hitting zone is a separate insert. When it wears, you replace only that strip — the base mat and stance surface stay in service for the long term.
Material hardness and deflection are tuned to reduce repetitive-impact stress on ankles, knees, and wrists compared to firmer commercial mats.
Replacing one insert costs significantly less than replacing a full mat. The Beaver Tail is built for golfers who plan to hit thousands of balls per year.
The VTrack mounts overhead, the BenQ AK700ST hangs from the ceiling bracket behind the hitting position, and the Beaver Tail mat anchors the floor. The result is a clean bay with no floor clutter and no cables crossing the hitting zone.
Eagle 12 enclosure pictured. Putting green not included in the standard SimKit.
Each SimKit includes the mounting hardware and cabling required to install the BenQ AK700ST at ceiling height, plus a landing mat sized to the selected enclosure. No separate accessory sourcing required.
Ceiling mount bracket for the BenQ AK700ST, 25 ft power cable, and 25 ft HDMI cable — pre-measured for the ceiling-mount-to-PC run in a standard simulator bay. All hardware is included; no additional mounting parts are needed.
A 6 ft × 12 ft landing mat ships with Birdie 10 and Eagle 12 configurations. A 6 ft × 15 ft landing mat ships with the Albatross 13. The mat covers the floor between the hitting position and the enclosure screen to protect the impact area and reduce ball bounce-back noise.
Protective housing installed around the VTrack unit on the ceiling. Shields the cameras and housing from direct ball contact on high-launch, high-spin shots that travel toward the ceiling mount position.
Every item listed below ships with the SimKit. Primary components and accessories are separated below for clarity — the complete list is what arrives at the door.
| Launch Monitor | VTrack Overhead (ceiling-mounted, photometric) |
| Projector | BenQ AK700ST — 4,000 ANSI lumens, 4K UHD laser |
| Throw Ratio | 0.69–0.83:1 (short throw) |
| Light Source Life | ~20,000 hours (laser, no bulb) |
| Golf Color Mode | Yes — factory-tuned for golf simulation |
| Motorized Zoom | 1.2× |
| HDR Support | HDR10 + HLG |
| Keystone Correction | ±30° V/H/rotation + Corner Fit |
| Alignment | Auto Screen Fit (one-button) + Quick Focus |
| Enclosure Options | Birdie 10 / Eagle 12 / Albatross 13 |
| Hitting Mat | Beaver Tail 4 ft × 8.25 ft, replaceable strip |
| Landing Mat | 6×12 (B10/E12) — 6×15 (A13) |
| Software | GSPro, E6 Connect, TGC 2019, Awesome Golf |
| Handedness | Right & Left (no hardware change) |
| Connectivity | Dual HDMI 2.0, USB-C DP Alt Mode |
| Dust Rating | IP5X optical engine |
| Shipping | Free UPS Ground — Continental US |
A golfer who notices when course turf looks washed out or when the sky reads as white. Golf Color Mode addresses this at the factory level rather than through manual projector calibration.
Someone building a bay they intend to use for 5 to 10 years. A ~20,000-hour laser source and replaceable hitting strip reduce ongoing operating costs relative to bulb-based projectors and single-surface mats.
A golfer who wants to walk into the bay and play — not recalibrate before each session. The VTrack needs no stickers, Auto Screen Fit handles projector alignment, and handedness switching is instant.
Households that run GSPro for serious practice, E6 for entertainment, and TGC 2019 for course variety. The VTrack and BenQ AK700ST support all three without switching hardware.
The VTrack Premium 4K SimKit with BenQ AK700ST is one of two pre-configured VTrack packages. The Bundle Builder allows full component customization if neither pre-built configuration matches your requirements.
Choose any launch monitor, projector, enclosure, mat, and accessories from the full ESG catalog and build a custom package. The Bundle Builder flags compatibility issues and keeps the component list coherent as you select.
Open Bundle Builder →The same VTrack overhead launch monitor, enclosure choice, and Beaver Tail mat — paired with the Optoma ZK521ST-B instead. The Optoma delivers 5,000 ANSI lumens (vs. 4,000 on the BenQ) and includes Smart Fit automatic alignment via smartphone camera. The BenQ counters with Golf Color Mode and motorized zoom. Both use a short-throw laser at comparable throw ratios.
View Optoma ZK521ST-B SimKit →Enter your enclosure width and ceiling height to confirm the BenQ AK700ST throw distance and mount position before ordering. Never calculate throw distances manually.
Open Fitment Tool →Build a custom simulator package with any combination of launch monitor, projector, enclosure, and mat from the ESG catalog. Full compatibility is enforced in the builder.
Open Bundle Builder →Frame assembly diagrams and step-by-step install instructions for all ESG enclosures. Covers hardware layout, ceiling mount positioning, and cable routing.
View Assembly Guides →How do I choose between the Birdie 10, Eagle 12, and Albatross 13?
The enclosure choice is primarily a room-width decision. The Birdie 10 fits in a 10 ft wide space with some clearance, the Eagle 12 requires approximately 12 ft, and the Albatross 13 requires approximately 13 ft plus wall clearance. The wider the enclosure, the larger the projected image and the more side-to-side room for a full swing. Use the Projector Fitment Tool alongside the enclosure dimensions to model both the floor footprint and the projector throw for your specific room before choosing.
What is the projector throw distance for the BenQ AK700ST in my room?
Throw distance depends on your enclosure width, screen size, and ceiling mount height — it is not a single fixed number. Use the Projector Fitment Tool to enter your specific room dimensions and get an accurate throw range for the BenQ AK700ST. The throw ratio is 0.69–0.83:1 across the motorized zoom range, but exact mount position must be verified with the tool.
Which simulator software is compatible with the VTrack?
The VTrack has native integrations with GSPro and E6 Connect. It is also compatible with TGC 2019 and Awesome Golf. The BenQ AK700ST is display-only and is compatible with any software that runs on the connected PC — projector choice does not restrict software compatibility.
What ceiling height is required for the VTrack?
A minimum of 9 ft of ceiling clearance is recommended to allow a full driver swing without risk of the club striking the ceiling. Taller players or those with very upright swings may benefit from additional clearance. Confirm your finished ceiling height before ordering, accounting for any overhead obstructions such as beams, joists, or ductwork.
Does the VTrack support left-handed golfers?
Yes. The VTrack supports both right-handed and left-handed play. Switching between orientations requires no hardware repositioning and no recalibration — handedness is set in the software, and the unit detects ball and club motion from either side without adjustment.
Are there ongoing subscriptions required to use this SimKit?
The VTrack hardware itself does not require a separate paid subscription to function as a launch monitor. GSPro and E6 Connect are purchased separately and have their own licensing models. The BenQ AK700ST requires no software subscription. Check the current subscription status of GSPro and E6 Connect directly with those providers as their licensing terms may change over time.
What size landing mat is included — 6×12 or 6×15?
Landing mat size depends on the enclosure selected. Birdie 10 and Eagle 12 configurations include a 6 ft × 12 ft landing mat. Albatross 13 configurations include a 6 ft × 15 ft landing mat. The larger mat fills the floor depth of the wider bay more completely and reduces ball rebound travel distance.
What does the VTrack Impact Protector do?
The Impact Protector is a housing installed around the VTrack unit on the ceiling. It shields the cameras and main body from direct contact with high-launch shots that carry toward the ceiling mount position. It is included with every SimKit configuration and is designed specifically for the VTrack’s mounting footprint.
Can I customize this SimKit or swap components?
Yes. The SimKit Bundle Builder allows full component selection across the ESG catalog — choose a different launch monitor, projector, enclosure, or mat combination. The builder enforces compatibility as you select components. If you want this exact VTrack configuration with a different projector, the Optoma ZK521ST-B version of this SimKit is available as a separate pre-built package.
What is BenQ Golf Color Mode and why does it matter for simulation?
Golf Color Mode is a factory-calibrated picture preset in the BenQ AK700ST tuned specifically for golf simulation content. It adjusts color temperature, green channel saturation, and sky blue reproduction to more accurately render the colors that appear in golf simulation — fairways, rough, sand, water, and sky — compared to standard cinema or presentation modes. This is a feature exclusive to the BenQ projector in the VTrack SimKit lineup and is not available on the Optoma ZK521ST-B alternative.
How does this SimKit ship and how long does delivery take?
The VTrack Premium 4K SimKit with BenQ AK700ST ships free via UPS Ground to the Continental United States. There are no shipping charges added at checkout. Delivery timeline varies by destination and carrier schedule — contact the ESG team via the Contact page for current lead times on your specific location.
BenQ AK700ST vs. Optoma ZK521ST-B — which projector should I choose?
The BenQ AK700ST includes Golf Color Mode (the Optoma does not) and motorized 1.2× zoom for easier image sizing post-mount. The Optoma ZK521ST-B delivers 5,000 ANSI lumens (vs. 4,000 for the BenQ) and includes Smart Fit automatic alignment via a smartphone camera. If color accuracy and long-term laser performance are the priority, the BenQ is the stronger fit. If raw brightness and automated smartphone-guided alignment are higher priorities, consider the Optoma version of this SimKit.
Every SimKit is assembled from components that are verified to work together — mount compatibility, throw ratio, cable length, mat sizing, and software integration are confirmed before the package is listed. The BenQ AK700ST configuration is not a generic projector bundle; it is a specific combination selected because Golf Color Mode, motorized zoom, and laser longevity make a meaningful difference in a day-to-day simulator bay.
Every component in the SimKit has been confirmed to work with the others — projector throw ratio, mount bracket, cable run, and software stack are all verified before shipment.
The landing mat, HDMI cable, and power cable ship pre-sized for this specific kit. Nothing arrives short or requires an additional purchase to install.
ESG provides setup guidance and post-purchase support for the full SimKit — not just individual components. Contact the team via the Contact page for setup questions after delivery.
Ships within 48 hours · Estimated delivery Jun 21 - Jun 26
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order