The XLERATOReco XL-SB-ECO is the no-heat, energy-efficient hand dryer from Excel Dryer — the XLERATOReco platform in brushed stainless, drawing a maximum of 500 watts and backed by Excel Dryer's 7-year limited warranty and Made in USA Certified® manufacturing. Independent SGS testing shows the XLERATOReco dries hands in 10 seconds¹ at just 1.7 Wh of energy per use — roughly half the energy of the standard XLERATOR. Excel Dryer positions it as the version that helps qualify for the most LEED® credits in the XLERATOR family, making it a common spec for LEED- and WELL-certified buildings, corporate sustainability projects, libraries, spas, and offices. As an Authorized Stocking Distributor with a Low Price Guarantee, Total Restroom offers the XL-SB-ECO in multiple voltage configurations and ships from a U.S. distribution network.

Need heated drying or maximum throughput? See the XLERATOR XL-SB — same brushed stainless cover, 1,450W with adjustable heat for high-traffic environments.

Specifications

• Model / MPN: XL-SB-ECO (XLERATOReco Hand Dryer)
• Cover finish: Brushed Stainless Steel
• Activation: Automatic sensor-operated, with adjustable sensor range
• Mounting: Surface-mounted
• Dimensions: 11-3/4" W × 12-11/16" H × 6-11/16" D (298 × 322 × 170 mm)
• Dry time: 10 seconds¹
• Energy per use: 1.7 Wh
• Adjustable sound level: 65–75 dB
• Adjustable air velocity: 13,000–20,000 LFM
• Flow rate: 43–65 CFM
• Heat: No-heat technology — 500W maximum
• Voltage options: 110-120V or 208-277V standard multi-voltage options; other configurations may be available by order
• Frequency / phase: 50/60 Hz, single phase
• 110-120V load: 4.3–4.5 amps and 460–530 watts
• 208-277V load: 2.0–2.2 amps and 425–500 watts
• Service indicator: Externally Visible Service LED
• Filtration: Washable pre-filter (standard); optional eHEPA® electrostatic HEPA
• Warranty: 7-year limited (Excel Dryer)
• Country of origin: Made in USA Certified®
• Listings & certifications: Smart EPD® verified Environmental Product Declaration; GreenSpec Listed
• Shipping weight: 16.0 lb (7.26 kg)

Key Features

10-Second Dry Time at 1.7 Wh Energy Use
The XLERATOReco is engineered for energy efficiency without sacrificing dry-time performance. Independent SGS International testing — performed on the XLERATOReco to 0.25g or less of residual moisture, per the UL Environment Global Product Category Rules for hand dryers — confirms a 10-second dry time at just 1.7 Wh per use. That's roughly half the energy use of the standard XLERATOR with only a few seconds added to dry time.

No-Heat Technology — 500W Maximum
The XLERATOReco uses no-heat technology, drawing a maximum of 500 watts at any voltage. Multiple Eco units can typically run on a single circuit — Excel Dryer notes the lower per-unit electrical load can significantly reduce installation costs and shorten payback. Sound is field-adjustable from 65–75 dB and air velocity from 13,000–20,000 LFM, so the same SKU works across a range of restroom environments.

7-Year Limited Warranty, Made in USA Certified®
Excel Dryer backs the XLERATOReco with a 7-year limited warranty. Every XLERATOReco is built in the United States and carries Made in USA Certified® designation. The brushed stainless cover is well suited for daily commercial restroom use.

Externally Visible Service LED
An externally visible Service LED lets maintenance staff identify a fault condition without opening the unit or interrupting service. Combined with the washable pre-filter, this design keeps maintenance simple — wipe down, inspect, return to service.

Optional eHEPA® Filtration and 1.1" Noise Reduction Nozzle
Two factory-orderable upgrades extend the platform: the eHEPA® electrostatic HEPA filtration system removes 99.999% of viruses and 99.97% of potentially present bacteria at 0.3 microns from the airstream² (-H suffix), and the 1.1" Noise Reduction Nozzle drops sound output by 9 decibels while adding only about 3 seconds to dry time (-1.1N suffix). Specify these at order time.

LEED, WELL, and EPD Documented
Excel Dryer received the industry's first certified Environmental Product Declarations (EPDs) under the UL Environment global PCR for hand dryers. Excel Dryer positions the XLERATOReco specifically as the model that helps qualify for the most LEED® credits in the XLERATOR family. The XL-SB-ECO is GreenSpec Listed.

Which Finish Is Right For You?

The XL-SB-ECO is the brushed stainless steel finish — a popular XLERATOR cover for commercial restrooms because it hides smudges and matches stainless washroom accessories. The XLERATOReco family ships in five standard finishes plus two custom options:

• XL-SB-ECO — Brushed Stainless Steel (this page)
• XL-W-ECO — White Epoxy Painted
• XL-C-ECO — Chrome Plated
• XL-GR-ECO — Graphite Textured Painted
• XL-BW-ECO — White Thermoset Resin (BMC)

Custom Special Paint and Custom Special Image covers are also available — call us for branded or color-matched orders.

XLERATOReco or Standard XLERATOR?

If your priority is energy savings, lower utility bills, LEED contribution, or quieter operation, the XLERATOReco is the right SKU. If your priority is fastest possible throughput and you need heated drying, look at the standard XLERATOR instead. Both share the same 11-3/4" × 12-11/16" footprint, the same 7-year warranty, and the same range of cover finishes — the Eco trades a few seconds of dry time for roughly half the energy use. If your project priority is energy savings and LEED, the XL-SB-ECO is the right SKU. If you need fastest throughput with heat, see the XLERATOR XL-SB in the same brushed stainless finish.

Installation Guidance

The XL-SB-ECO is surface-mounted and designed for commercial restroom installation. Excel Dryer's suggested mounting heights, measured from the floor to the bottom of the dryer, are 45" (114 cm) for men's washrooms, 43" (109 cm) for women's washrooms, and 37" (94 cm) for accessible installations. Because the Eco draws 4.3–4.5 amps / 460–530 watts at 110-120V, multiple Eco units can typically share a circuit — confirm with a licensed electrician for your specific installation. Allow appropriate clearance on either side and below the unit so the air stream and sensor work as designed.

For ADA-compliant installations where the dryer must project less than 4 inches from the wall, order the optional ADA-Compliant Recess Kit (#40502) — the standard XL-SB-ECO projects 6-11/16" (170mm) and is not ADA-compliant on its own. If you're retrofitting into a paper-towel cabinet location, the XChanger® retrofit kit (#40575 or #40550) drops the XLERATOReco into a recessed cavity. Antimicrobial Wall Guards (#89B/W/S) are available for high-touch and high-traffic locations.

Frequently Asked Questions

How long does the XL-SB-ECO take to dry hands?
The XLERATOReco dries hands in 10 seconds, per independent SGS International testing. That test is performed to 0.25g or less of residual moisture, following the UL Environment Global Product Category Rules for hand dryers. Real-world dry times will vary slightly with technique, room conditions, and selected speed settings.

What voltage does the XL-SB-ECO use?
The XL-SB-ECO is multi-voltage with two standard options: 110-120V and 208-277V at 50/60 Hz, single phase. At 110-120V the unit draws 4.3–4.5 amps and 460–530 watts; at 208-277V it draws 2.0–2.2 amps and 425–500 watts. A 230V single-phase configuration drawing 2.2 amps at 500 watts (50 Hz) may be available by order. Because the Eco draws under 5 amps at 110-120V, multiple units can typically share a circuit — confirm with a licensed electrician for your specific installation. Pick the voltage option that matches the circuit available at the install location.

Is the XLERATOReco XL-SB-ECO ADA-compliant?
Not on its own — the XL-SB-ECO projects 6-11/16" (170mm) from the wall, which exceeds the 4" projection limit for accessible routes. To make the XL-SB-ECO ADA-compliant, install Excel Dryer's optional ADA-Compliant Recess Kit (#40502), which recesses the unit into the wall. Final ADA compliance also depends on mounting height and clear floor space at the installed location.

Can I adjust the speed and sound on the XL-SB-ECO?
Yes. The XLERATOReco has field-adjustable settings for sound level (65–75 dB), air velocity (13,000–20,000 LFM), air flow rate (43–65 CFM), and sensor pickup range. That means the same XL-SB-ECO can be dialed quieter for a hotel washroom or louder and faster for a stadium concourse.

Does the XLERATOReco have HEPA filtration?
HEPA is an optional upgrade — order the -H suffix to add the eHEPA® electrostatic HEPA filtration system. Per LMS Technologies testing in 2023, the eHEPA filter removes 99.999% of viruses and 99.97% of potentially present bacteria at 0.3 microns from the airstream. The standard XL-SB-ECO ships with a washable pre-filter; the eHEPA upgrade adds the electrostatic stage on top.

Does the XLERATOReco qualify for LEED or WELL credits?
Yes. Excel Dryer holds the industry's first certified Environmental Product Declarations (EPDs), verified by Smart EPD® under the UL Environment global Product Category Rules for hand dryers. The XLERATOReco specifically helps qualify for the most LEED® credits within the XLERATOR family, per Excel Dryer. Excel Dryer can provide LEED v4 and v4.1 credit summaries, EPDs, HPDs, and life-cycle assessment documentation to support project documentation.

What's the warranty?
Excel Dryer covers the XLERATOReco XL-SB-ECO with a 7-year limited warranty. Coverage details and registration are available directly from Excel Dryer.

Should I choose the XLERATOReco or the standard XLERATOR?
If your priority is energy savings, lower utility bills, LEED contribution, or quieter operation, the XLERATOReco is the right SKU. If your priority is fastest possible throughput and you need heated drying, look at the standard XLERATOR instead. Both share the same 11-3/4" × 12-11/16" footprint, the same 7-year warranty, and the same range of cover finishes — the Eco trades a few seconds of dry time for roughly half the energy use.

¹ Dry time and energy use testing performed by SGS International on XLERATOReco Hand Dryer to 0.25g or less of residual moisture, pursuant to the UL Environment Global Product Category Rules (PCR) for Hand Dryers.
² Based on testing performed by LMS Technologies, 2023.