The Goulds 2GA81J2ED 2GA Series 2" Submersible Grinder Pump is backed by 170 years of American ingenuity - engineered, built and tested in the USA. Heavy duty cast iron pump body and over-sized ball bearings in the motor ensure superior performance and longevity. The 1GA / 2GA series is the best choice when high head pressure is needed for commercial and municipal sewage.

**Picture is stock photo - please contact customer service for assistance in selecting the correct pump and motor for your needs.**

Specifications:

HP:  6

Body Material:  Cast Iron

Impeller:  Cast Iron

Motor:  Three Phase, 200V

Maximum Amps:  17.0

Start Amps:  133.0

Locked Rotor Amps:  79.0

Power Cable Size:  12/7

RPM:  3450

Weight:  172 lbs

The 1GA/2GA series is capable of grinding municipal, commercial and industrial sewage. Enjoy a cutter system designed to reduce sewage to a fine slurry utilizing a cast iron, semi-open, non-overloading multivane design impeller with pump-out vanes for mechanical seal protection. Cast iron casing, volute type for high efficiency. Adaptable for slide rail system with two coat paint system for superior surface protection. Float Leakage Sensor (FLS): a small internal float switch is used to detect the presence of water in the stator chamber. Standard on all models. Leakage Sensor Detector Circuit: The FLS, when activated, will cause the patented 24 volt MiniCAS monitoring relay to signal an alarm and, if desired, stop the pump. The MiniCAS 24 volt relay can be ordered separately for installation in a control panel by a UL or CSA certified panel shop or as a built-in option in our control panel.

Series Features:

• Design: Capable of grinding municipal, commercial and industrial sewage.
• Cutter System: Designed to reduce sewage to a fine slurry.
• Impeller: Cast iron, semi-open, non-overloading multivane design with pump-out vanes for mechanical seal protection.
• Casing: Cast iron, volute type for high efficiency.
• Adaptable for slide rail system.
• Paint: Two coat paint system for superior surface protection.
• Float Leakage Sensor (FLS): a small internal float switch is used to detect the presence of water in the stator chamber. Standard on all models.
• Leakage Sensor Detector Circuit: The FLS, when activated, will cause the patented 24 volt MiniCAS monitoring relay to signal an alarm and, if desired, stop the pump.
• The MiniCAS 24 volt relay can be ordered separately for installation in a control panel by a UL or CSA certified panel shop or as a built-in option in our control panel.

Applications:

• High head and pressure sewage systems for: Municipal, Commercial, and Industrial

Specifications:

• Pump:
  • 1GA:
  • Discharge Size: 1½”
  • Maximum Capacity: 92 GPM.
  • Maximum Total Head: 117’ TDH.
  • 2GA:
  • Discharge Size: 2”
  • Maximum Capacity: 198 GPM.
  • Maximum Total Head: 178’ TDH.
  • Maximum temperature rating: 104º F (40º C) continuous duty
  • Tandem mechanical seals: see Application Data for details.
  • Fasteners: 300 series stainless steel.
  • Rotating cutter: chrome alloyed cast iron.
  • Cutter ring: hardened 316L stainless steel.
  • Cast iron parts are ASTM A-48, Class 35B.
    
• Motor:
  • Air-filled design
  • NEMA type B
  • Class F insulation
  • 60 Hz
  • Shaft: 431 series stainless steel, taper collet design.
  • Ball bearings: oversized, pre-greased upper and lower ball bearings.
  • Power cord: 30 feet standard, single jacket, 6 conductor combination power and control cable. Optional 100 foot lead is available.
    
    • Single Phase:
      • 3 HP @ 3450 RPM
      • 5.4 HP @ 3450 RPM
      • 9.4 HP @ 3450 RPM
      • 230 Volts
    • Three Phase:
      • 4 HP @ 3450 RPM
      • 6 HP @ 3450 RPM
      • 11 HP @ 3450 RPM
      • 200, 230, 460 and 575 Volts

Motors:

• Air-filled, NEMA type B squirrel cage induction motor
• Class F, 311º F (155º C) insulated stator winding
• Designed for a maximum of 15 evenly spaced starts per hour.
• Built-in thermal sensors provide an over temperature signal to the Mini CAS (Control and Status) monitoring relay mounted in the control panel. The Mini CAS can be ordered separately or ordered as an option in our control panel.
• Common pump motor shaft and compact seal design permit short overhang minimizing shaft deflection.
• Motor casings have integral cooling ribs for maximum heat dissipation.
• Shaft mounting is a robust maintenance free design featuring pre-greased ball bearings.
• The junction chamber is completely sealed off from the surrounding liquid and incorporates a separate gland assembly with a strain relief clamp.
• Also available in optional Explosion Proof construction. Explosion Proof motor listed Class 1, Division 1, Groups C and D. These units are FM approved.

Controls:

• SINGLE PHASE UNITS require capacitors. See panels BCP5 R13 for Standard Construction and Explosion Proof.
• THREE PHASE UNITS can use standard panel selections with option added for minicas device (i.e. options O, simplex and P, duplex).